Reduce your cabling
by 70%
One switch per zone. 10Gbps backbone. Fewer cables in your riser. Professional infrastructure that scales — from a 4-camera home to a 50-camera commercial site.
30 cables where 3 would do
Most installations run one cable per device back to a central point. In a 3-storey home with cameras, access points, and intercoms, that means 20-30 UTP cables choking through the riser. It is messy, expensive to install, and a nightmare to maintain or troubleshoot. There is a better way — professional infrastructure that reduces riser cables from 30 to 3, speeds up your backbone to 10Gbps, and makes future expansion trivial.
Ruijie Reyee ES2 Series
Budget-friendly smart managed switches with PoE+. Free cloud management, silent fanless operation, and enough PoE budget for cameras and access points. The starting point for most installations.
Ruijie Reyee ES206GS-P
KSh 8,0606-port smart PoE+ switch. Four PoE ports at 54W total budget — enough to power 2-4 cameras or access points. Compact form factor for small camera clusters or single-room setups.
- 4 PoE+ ports, 2 uplink ports
- 54W total PoE budget — powers 2-4 devices
- Smart managed — VLAN, QoS, IGMP snooping
- Fanless — silent operation for offices and homes
- Free Ruijie Cloud management
Ruijie Reyee ES210GS-P
KSh 15,08010-port smart PoE+ switch with 8 powered ports and 120W budget. The workhorse for small offices, retail shops, and home networks with cameras, access points, and VoIP phones on a single switch.
- 8 PoE+ ports, 2 uplink ports
- 120W total PoE budget — powers 6-8 devices comfortably
- Smart managed — VLANs, QoS, loop detection
- Desktop or rack mount — versatile placement
- Free Ruijie Cloud management
Ruijie Reyee ES220GS-P
KSh 28,08020-port smart PoE+ switch with 16 powered ports and 250W budget. For medium offices, multi-camera sites, and buildings where a single zone needs 10-16 PoE devices.
- 16 PoE+ ports, 4 uplink ports (2x SFP)
- 250W total PoE budget — powers 12-16 devices
- SFP uplinks for fiber connection to core switch
- Smart managed — VLANs, QoS, IGMP, port mirroring
- 19" rackmount — fits standard network cabinets
Ruijie Reyee ES228GS-P
KSh 37,83028-port smart PoE+ switch with 24 powered ports and 370W budget. For large deployments — warehouses, campus buildings, hotels — where one switch serves an entire floor or wing.
- 24 PoE+ ports, 4 uplink ports (2x SFP)
- 370W total PoE budget — powers 20+ devices
- High density — one switch per floor or wing
- Smart managed — full L2 feature set
- 19" rackmount with console port
Ruijie NBS Series — 10G fibre uplinks
Full L2 managed switches with 10G SFP+ uplinks for fibre backbone connections between floors. VLANs, ACLs, stacking, and SNMP for enterprise-grade networks.
Ruijie NBS3100-8GT2SFP-P
KSh 29,3808-port L2 managed PoE switch with 2 SFP uplink slots. The per-floor switch — connect cameras and APs on the floor, then run a single fiber uplink to the core. VLANs, ACLs, and SNMP for enterprise-grade control.
- 8 Gigabit PoE+ ports, 2 SFP uplink slots
- Full L2 managed — VLANs, ACLs, QoS, SNMP
- SFP uplinks — fiber connection to core switch
- Per-floor deployment — reduces riser cabling dramatically
- CLI + web GUI + cloud management
Ruijie NBS3200-24GT4XS-P
KSh 60,06024-port L2 managed PoE switch with 4x 10G SFP+ uplinks. 10Gbps backbone between floors — connect all your per-floor switches to this core, or use it as a high-density floor switch with blazing uplink speeds.
- 24 Gigabit PoE+ ports, 4x 10G SFP+ uplinks
- 10Gbps backbone — aggregation or core switch
- Full L2 managed — VLANs, ACLs, SNMP, RMON
- Stacking support — manage multiple switches as one
- 19" rackmount — standard network cabinet
Ruijie NBS3200-48GT4XS-P
KSh 112,84048-port L2 managed PoE switch with 4x 10G SFP+ uplinks. High-density core switch for large campuses, hotels, and commercial buildings. One switch to serve an entire building or serve as the aggregation core.
- 48 Gigabit PoE+ ports, 4x 10G SFP+ uplinks
- High density — one switch for 48 devices
- 10Gbps fiber backbone for inter-floor links
- Full L2 managed — enterprise feature set
- Ideal for hotels, hospitals, large offices
Ruijie NBS3300-8MG2XS-P
KSh 44,7208-port Multi-Gigabit managed switch with 2x 10G SFP+ uplinks. 2.5G on every port — future-proof for WiFi 7 access points that need more than 1Gbps backhaul. The switch you buy today that still works in five years.
- 8x 2.5G Multi-Gigabit PoE+ ports
- 2x 10G SFP+ uplinks
- Future-proof — ready for WiFi 7 APs (2.5Gbps backhaul)
- Full L2 managed — VLANs, QoS, ACLs
- Compact form factor — desk or rack mount
UniFi switches for the Ubiquiti ecosystem
If you are already running UniFi Protect cameras or UniFi WiFi access points, these switches give you unified management in a single pane of glass.
Ubiquiti USW-Flex
Contact for priceCompact 5-port outdoor-rated PoE switch. Mount it next to a cluster of cameras or APs and power them from a single uplink cable. IP55 weatherproof — works outdoors, in parking garages, and on rooftops.
- 5 Gigabit ports — 4 PoE out, 1 PoE in (powered by upstream switch)
- IP55 outdoor rated — rain, dust, and temperature resistant
- No power adapter needed — powered via PoE from upstream switch
- UniFi managed — full visibility in UniFi Network app
- Ideal for camera clusters and outdoor AP deployments
Ubiquiti USW-Ultra
Contact for priceCompact 8-port managed switch for the UniFi ecosystem. PoE+ output on select ports, managed through the UniFi Network app. Clean desktop form factor for small offices and home racks.
- 8 Gigabit ports with PoE+ on 4 ports
- UniFi managed — VLANs, traffic rules, device adoption
- Compact desktop form factor — fits anywhere
- Layer 2 features — VLANs, port isolation, storm control
- Pairs with UniFi Protect cameras and WiFi APs
How to choose a network switch
Three deployment sizes, three recommendations. Match your switch to the scale of your network.
Home / Small Office
2-8 PoE devices- Ruijie ES206GS-P (4 PoE) or ES210GS-P (8 PoE)
- Smart managed — set-and-forget with cloud monitoring
- Powers cameras, access points, VoIP phones
- No SFP ports needed — everything on one floor
- Budget: KSh 8,000 - 15,000
Medium / Multi-Zone
8-24 PoE devices, VLANs needed- Ruijie NBS3100-8GT2SFP-P per zone
- Full L2 managed — VLANs separate cameras, WiFi, and office traffic
- SFP uplinks connect zones to a core switch via fiber
- Reduces riser cables from dozens to a single fiber per zone
- Budget: KSh 29,000 - 60,000 per zone
Large / Multi-Floor
24+ PoE devices, 10G backbone- Ruijie NBS3200-24GT4XS-P or 48GT4XS-P as core
- 10G SFP+ fiber backbone between floors
- Stacking for unified management across switches
- NBS3300-8MG2XS-P for WiFi 7 AP zones
- Budget: KSh 60,000 - 113,000 per core switch
Network switch FAQ
What is PoE (Power over Ethernet)?
PoE delivers both data and electrical power over a single Ethernet cable. Instead of running a separate power cable to each camera, access point, or VoIP phone, the switch sends power through the same UTP cable. PoE+ (802.3at) provides up to 30W per port — enough for most cameras and WiFi access points.
What is the difference between managed and unmanaged switches?
Unmanaged switches are plug-and-play with no configuration — suitable for simple setups. Managed switches give you control: VLANs to separate traffic (cameras on one network, WiFi on another), QoS to prioritise video streams, port security, SNMP monitoring, and SFP uplinks for fiber connections. If you have more than 10 devices or multiple floors, you almost certainly need managed switches.
What is SFP and SFP+?
SFP (Small Form-factor Pluggable) is a modular slot on managed switches that accepts fiber optic or copper transceivers. SFP runs at 1Gbps, SFP+ runs at 10Gbps. Fiber SFP modules allow you to connect switches between floors or buildings using thin fiber optic cable instead of bulky copper bundles — one fiber replaces dozens of copper cables in the riser.
How many cameras can one PoE switch power?
Divide the switch PoE budget by the power draw per camera (typically 12-15W for a standard IP camera). For example: the ES210GS-P has 120W budget ÷ 15W per camera = 8 cameras. The ES228GS-P has 370W ÷ 15W = 24 cameras. Always leave 10-20% headroom for power spikes during night vision activation.
Do I need a managed switch for my home?
If you have fewer than 10 devices on a single floor, a smart managed switch (ES206 or ES210) is sufficient — it offers basic VLANs and monitoring without complexity. If you have multiple floors, more than 10 PoE devices, or need to separate camera traffic from your home WiFi, step up to a full L2 managed switch (NBS3100 or NBS3200) with SFP uplinks.
Do you design networks and install switches?
Yes. We design structured cabling layouts, recommend switch placement for minimal cable runs, and install everything — switches, patch panels, fiber uplinks, and cable management. WhatsApp us your floor plan and we will provide a free network design consultation with a bill of materials.
Send us your floor plan, we'll design your network
WhatsApp us your floor plan or site details. We'll recommend switch placement, PoE budgets, fibre uplinks, and cable routes — free consultation, no obligation.